Hatch Properties |
The Hatch type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Associative |
Gets if the hatch is associative or not, which means if the hatch object is associated with the hatch boundary entities.
|
| BoundaryPaths |
Gets the hatch boundary paths.
|
| CodeName |
Gets the dxf entity type string.
(Inherited from DxfObject.) |
| Color |
Gets or sets the entity color.
(Inherited from EntityObject.) |
| Elevation |
Gets or sets the hatch elevation, its position along its normal.
|
| Handle |
Gets the handle assigned to the dxf object.
(Inherited from DxfObject.) |
| IsVisible |
Gets or set the entity visibility.
(Inherited from EntityObject.) |
| Layer |
Gets or sets the entity layer.
(Inherited from EntityObject.) |
| Linetype |
Gets or sets the entity line type.
(Inherited from EntityObject.) |
| LinetypeScale |
Gets or sets the entity line type scale.
(Inherited from EntityObject.) |
| Lineweight |
Gets or sets the entity line weight, one unit is always 1/100 mm (default = ByLayer). Valid value are: 0, 5, 9, 13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70, 80, 90, 100, 106, 120, 140, 158, 200, and 211.
(Inherited from EntityObject.) |
| Normal |
Gets or sets the entity normal.
(Inherited from EntityObject.) |
| Owner |
Gets the owner of the actual dxf object.
(Inherited from EntityObject.) |
| Pattern |
Gets the hatch pattern.
|
| PatternName |
Hatch pattern name.
|
| Reactors |
Gets or sets the list of dxf objects that has been attached to this entity.
(Inherited from EntityObject.) |
| Transparency |
Gets or sets layer transparency (default: ByLayer).
(Inherited from EntityObject.) |
| Type |
Gets the entity type.
(Inherited from EntityObject.) |
| XData |
Gets or sets the entity extended data.
(Inherited from EntityObject.) |
See Also